New NSE7_LED-7.0 Test Practice & Valid Dumps NSE7_LED-7.0 Questions

Choosing our products is choosing success. Our website offers the valid NSE7_LED-7.0 vce exam questions and correct answers for the certification exam. All questions and answers from our website are written based on the NSE7_LED-7.0 Real Questions and we offer free demo in our website. NSE7_LED-7.0 exam prep is 100% verified and reviewed by our expert team who focused on the study of IT exam preparation.

Fortinet NSE7_LED-7.0 certification exam covers a wide range of topics related to LAN edge security, such as secure network design, secure protocols, secure access, secure authentication, secure communication, and more. NSE7_LED-7.0 Exam is designed to test the skills and knowledge of the candidates in these areas, and it is based on real-world scenarios that network security professionals might encounter in their day-to-day work.

>> New NSE7_LED-7.0 Test Practice <<

Valid Dumps NSE7_LED-7.0 Questions | NSE7_LED-7.0 Valid Dumps Files

Our NSE7_LED-7.0 study materials take the clients’ needs to pass the test smoothly into full consideration. The questions and answers boost high hit rate and the odds that they may appear in the real exam are high. Our NSE7_LED-7.0 study materials have included all the information which the real exam is about and refer to the test papers in the past years. Our NSE7_LED-7.0 study materials analysis the popular trend among the industry and the possible answers and questions which may appear in the real exam fully. Our NSE7_LED-7.0 Study Materials stimulate the real exam’s environment and pace to help the learners to get a well preparation for the real exam in advance. Our NSE7_LED-7.0 study materials won’t deviate from the pathway of the real exam and provide wrong and worthless study materials to the clients.

Fortinet NSE 7 - LAN Edge 7.0 Sample Questions (Q40-Q45):

NEW QUESTION # 40
Refer to the exhibit

A device connected to port2 on FortiSwitch cannot access the network The port is assigned a security policy to enforce 802 1X authentication While troubleshooting the issue, the administrator obtains the debug output shown in the exhibit Which two scenarios are likely to cause this issue? (Choose two.)

A. The device has been assigned the guest VLAN
B. The device has been quarantined for 3600 seconds.
C. The device does not support 802 1X authentication
D. The device is not configured for 802 IX authentication.

Answer: C,D

Explanation:
According to the exhibit, the debug output shows that the device connected to port2 on FortiSwitch is sending an EAPOL-Start message, which is the first step of the 802.1X authentication process. However, the output also shows that the device is not sending any EAP-Response messages, which are required to complete the authentication process. Therefore, option A is true because the device is not configured for 802.1X authentication, which means that it does not have the correct credentials or settings to authenticate with the RADIUS server. Option D is also true because the device does not support 802.1X authentication, which means that it does not have the capability or software to perform 802.1X authentication. Option B is false because the device has not been quarantined for 3600 seconds, but rather has a session timeout of 3600 seconds, which is the default value for 802.1X sessions. Option C is false because the device has not been assigned the guest VLAN, but rather has been assigned the default VLAN, which is VLAN 1.

NEW QUESTION # 41
An administrator has deployed multiple dual-band wireless APs in a wireless network. APs are installed at measured distances to ensure fast roaming for the clients. Multiple 2.4 GHz-only wireless clients are connecting to the network, and subsequent monitoring shows that individual AP 2.4 GHz interfaces are being overloaded with wireless connections.
Which configuration change would best resolve the overloading issue?

A. Configure a client limit on all AP 2.4 GHz interfaces.
B. Configure load balancing AP handoff on only the 2.4 GHz interfaces of all APs.
C. Configure load balancing AP handoff on both AP interfaces on all Aps.
D. Configure load balancing frequency handoff on both AP interfaces.

Answer: A

NEW QUESTION # 42
Refer to the exhibit.
Examine the FortiGate logs, widget, and CLI output shown in the exhibit.

An administrator is testing the Security Fabric quarantine automation. The test device (10.0.2.2) is connected to a managed FortiSwitch device.
A few seconds after trying to access a malicious website from the test device, the test device can no longer access the internet and other VLANs in the network. However, the device is still able to access other devices in the same VLAN.
Based on the information shown in the exhibit, which modification should the administrator make to fix the problem?

A. Change the quarantine mode to by VLAN mode.
B. Configure a firewall policy on FortiGate to block the intra-VLAN traffic.
C. Enable the access layer quarantine action on the Quarantine_Devices automation stitch.
D. Change the quarantine mode to by redirect mode.

Answer: C

NEW QUESTION # 43
Refer to the exhibit.

Examine the partial debug output shown in the exhibit.

Which two statements about the debug output are true? (Choose1 two.)

A. The credentials provided for student are correct.
B. The connection to the Training-Lab LDAP server timed out.
C. The Training-Lab LDAP server is configured to use regular bind.
D. The LDAP DN search did not match any LDAP user.

Answer: A,C

NEW QUESTION # 44
Refer to the exhibit. Examine the LDAP server configuration shown in the exhibit. Note that the Username setting has been expanded to display its full content.
On the Windows AD server 10.0.1.10, the administrator used dsquery, which returned the following output:
>dsquery user -samid student
"CN=student,CN=Users,DC=trainingAD,DC=training,DC=lab"
According to the output, which FortiGate LDAP setting is configured incorrectly?

A. Username
B. Distinguished Name
C. Bind Type
D. Common Name Identifier

Answer: B

Explanation:
According to the exhibits, the LDAP server configuration on FortiGate has the Distinguished Name set to "dc=training,dc=lab". However, according to the output of the dsquery command on the Windows AD server, the Distinguished Name of the domain should be
"dc=trainingAD,dc=training,dc=lab".

NEW QUESTION # 45
......

Our NSE7_LED-7.0 test braindumps are in the leading position in the editorial market, and our advanced operating system for NSE7_LED-7.0 latest exam torrent has won wide recognition. As long as you choose our NSE7_LED-7.0 exam questions and pay successfully, you do not have to worry about receiving our learning materials for a long time. We assure you that you only need to wait 5-10 minutes and you will receive our NSE7_LED-7.0 Exam Questions which are sent by our system. When you start learning, you will find a lot of small buttons, which are designed carefully. You can choose different ways of operation according to your learning habits to help you learn effectively.

Valid Dumps NSE7_LED-7.0 Questions: https://www.itdumpsfree.com/NSE7_LED-7.0-exam-passed.html